{"title":"Accessories","description":"\u003cp\u003eFigurtech's leak tester lineup covers every production leak test requirement: from low-pressure IP67 electronics to high-pressure EV cooling circuits and sub-SCCM medical device validation. Choose from direct pressure, differential pressure, mass flow, or multi-channel platforms — each engineered for inline production-line deployment with PLC\/MES integration.\u003c\/p\u003e","products":[{"product_id":"precision-quick-seal-connectors-lt-series","title":"Precision Quick-Seal Connectors (LT Series)","description":"\u003cdiv class=\"fgt-product-desc\"\u003e\n\n  \u003cp class=\"fgt-lead\"\u003eFigurtech's LT Series quick-seal connectors are the critical interface between your leak tester and your test part. Engineered for rapid, bubble-tight connection without tools, they eliminate the most common source of fixture-related test variation: the seal itself.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy the Connector Matters\u003c\/h2\u003e\n  \u003cp\u003eEven the most sensitive leak tester produces unreliable results if the connection between the instrument and the test part leaks or varies between cycles. LT Series connectors are designed specifically for airtightness testing — not adapted from fluid fittings — with sealing geometries, materials, and operating cycles optimized for production-line use.\u003c\/p\u003e\n\n  \u003ch2\u003eModel Selection\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSealing Method\u003c\/th\u003e\n\u003cth\u003eOperation\u003c\/th\u003e\n\u003cth\u003eRange\u003c\/th\u003e\n\u003cth\u003eMax Pressure\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLT-D02\u003c\/td\u003e\n\u003ctd\u003eOD clamp (external)\u003c\/td\u003e\n\u003ctd\u003eLever handle\u003c\/td\u003e\n\u003ctd\u003eΦ0.80 – Φ31.0 mm (24 sizes)\u003c\/td\u003e\n\u003ctd\u003e9 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLT-D01\u003c\/td\u003e\n\u003ctd\u003eID expand (internal)\u003c\/td\u003e\n\u003ctd\u003eLever handle\u003c\/td\u003e\n\u003ctd\u003eΦ9.5 – Φ24.4 mm (15 sizes)\u003c\/td\u003e\n\u003ctd\u003e9 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLT-KZ02\u003c\/td\u003e\n\u003ctd\u003eClaw OD clamp\u003c\/td\u003e\n\u003ctd\u003eOne-hand snap\u003c\/td\u003e\n\u003ctd\u003eΦ6 – Φ52 mm (10 sizes)\u003c\/td\u003e\n\u003ctd\u003e50 bar (stainless steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLT-G01\u003c\/td\u003e\n\u003ctd\u003ePetal ID expand\u003c\/td\u003e\n\u003ctd\u003eLever handle\u003c\/td\u003e\n\u003ctd\u003eΦ6 – Φ52 mm\u003c\/td\u003e\n\u003ctd\u003e9 bar (zero axial force)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLT-Q01\u003c\/td\u003e\n\u003ctd\u003ePneumatic ID expand\u003c\/td\u003e\n\u003ctd\u003eAutomated pneumatic\u003c\/td\u003e\n\u003ctd\u003e7.7 – 78.0 mm (8 sizes)\u003c\/td\u003e\n\u003ctd\u003e9 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLT-LW01\u003c\/td\u003e\n\u003ctd\u003eInternal thread\u003c\/td\u003e\n\u003ctd\u003ePneumatic quick-connect\u003c\/td\u003e\n\u003ctd\u003eStandard threaded ports\u003c\/td\u003e\n\u003ctd\u003e9 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLT-LW02\u003c\/td\u003e\n\u003ctd\u003eExternal thread + lever\u003c\/td\u003e\n\u003ctd\u003ePress-lever lock\u003c\/td\u003e\n\u003ctd\u003eStandard threaded ports\u003c\/td\u003e\n\u003ctd\u003e9 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eTypical Applications by Connector Type\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLT-D02 (OD clamp):\u003c\/strong\u003e Water-cooled heat sinks, capillary tubes, automotive housings\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLT-D01 (ID expand, no axial force):\u003c\/strong\u003e Medical soft tubing — protects tube walls from deformation\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLT-KZ02 (stainless, 50 bar):\u003c\/strong\u003e EV battery trays at 400 kPa, high-pressure capillary testing at 700 kPa\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLT-G01 (zero axial force):\u003c\/strong\u003e EV liquid-cooling bent tubes — thin-wall aluminum protection\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLT-Q01 (pneumatic):\u003c\/strong\u003e Fully automated lines, robot-integrated fixtures\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eKey Specifications\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStandard body material\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHigh-pressure model (LT-KZ02)\u003c\/td\u003e\n\u003ctd\u003eStainless steel, up to 50 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStandard seal material\u003c\/td\u003e\n\u003ctd\u003eNBR (Nitrile Butadiene Rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService life (LT-KZ02 validated)\u003c\/td\u003e\n\u003ctd\u003e≥ 500,000 cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure range (standard models)\u003c\/td\u003e\n\u003ctd\u003e3 – 9 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOverall pressure range (full series)\u003c\/td\u003e\n\u003ctd\u003e−100 kPa to 50 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eWhy LT Series?\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDesigned for leak testing, not fluid handling:\u003c\/strong\u003e Sealing geometry and materials are optimized for gas-tight, repeatable airtightness test connections\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eZero-axial-force options:\u003c\/strong\u003e ID-expand models apply no axial or lateral force — essential for soft tubing, thin-wall aluminum, and fragile medical parts\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e500,000-cycle validated:\u003c\/strong\u003e LT-KZ02 stainless models are production-validated at high-volume automotive and EV lines\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFull automation compatible:\u003c\/strong\u003e LT-Q01 pneumatic models integrate directly into robotic cells and automated fixtures\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBroad size range:\u003c\/strong\u003e 24 sizes in OD-clamp models alone — covers micro capillaries to large enclosure ports\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cem\u003eSpecify your tube OD or ID, port geometry, and test pressure when ordering. Custom sizes and seal materials (Viton, silicone) are available on request.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Figurtech","offers":[{"title":"Default Title","offer_id":48632666882304,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3493\/1456\/files\/connector_candidate_1.png?v=1776934715"},{"product_id":"standard-leak-hole-standard-calibration-leak","title":"Standard Leak Hole (Standard Calibration Leak)","description":"\u003cdiv class=\"fgt-product-desc\"\u003e\n\n  \u003cp class=\"fgt-lead\"\u003eA Standard Leak Hole (Standard Calibration Leak) is a precision-drilled or micro-channel reference component used to verify the measurement accuracy and sensitivity of your leak test instruments. Without a calibrated leak reference, you cannot confirm that your tester is detecting what it claims to detect.\u003c\/p\u003e\n\n  \u003ch2\u003eWhat It Does\u003c\/h2\u003e\n  \u003cp\u003eEach Standard Leak Hole produces a stable, known, traceable leak rate under defined pressure conditions. When connected to your leak tester, it allows you to verify that the instrument responds correctly to a specific leak value — confirming the instrument is within calibration and that your test program thresholds are set correctly. This is a mandatory step in ISO- and IATF-compliant test line validation.\u003c\/p\u003e\n\n  \u003ch2\u003eTypes Available\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003cth\u003eTypical Use\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMicro-channel capillary\u003c\/td\u003e\n\u003ctd\u003ePrecisely drawn glass or metal capillary\u003c\/td\u003e\n\u003ctd\u003eVery low leak rates, medical and precision electronics\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMetal-flatten type\u003c\/td\u003e\n\u003ctd\u003eControlled deformation of metal tube\u003c\/td\u003e\n\u003ctd\u003eMid-range leak rates, automotive and industrial parts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLaser-drilled\u003c\/td\u003e\n\u003ctd\u003eLaser-ablated orifice in metal plate\u003c\/td\u003e\n\u003ctd\u003eHigh-precision, high-repeatability reference leaks\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eSpecifications\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLeak rate\u003c\/td\u003e\n\u003ctd\u003eCustomized to your specification (e.g., 0.5 ml\/min, 5 ml\/min, sccm equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±5% of nominal value\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCalibration certificate\u003c\/td\u003e\n\u003ctd\u003eThird-party traceable calibration certificate included\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eStandard 1\/8 NPT or customized port\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTraceability\u003c\/td\u003e\n\u003ctd\u003eFully traceable to national measurement standards\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eWhen You Need a Standard Leak Hole\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInitial instrument setup:\u003c\/strong\u003e Confirm your tester detects at the required sensitivity before production begins\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePeriodic calibration checks:\u003c\/strong\u003e Validate instrument performance at defined intervals (daily, shift-start, or per quality plan)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProcess validation:\u003c\/strong\u003e Required documentation for PPAP, IATF 16949, ISO 13485, and similar quality programs\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThreshold setting:\u003c\/strong\u003e Physically verify that your NG threshold actually catches the target leak rate\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCross-site consistency:\u003c\/strong\u003e Ensure multiple test stations or plants are measuring to the same standard\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eWhy Figurtech Standard Leak Holes?\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThird-party certified:\u003c\/strong\u003e Every unit ships with a traceable calibration certificate — ready for audit documentation\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCustom leak rates:\u003c\/strong\u003e Specify exactly the leak value your process requires — not limited to catalog values\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMatched to your instruments:\u003c\/strong\u003e Designed and validated to work with LY, LD, LF, LG, LM, and LE series testers\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cem\u003eSpecify your required leak rate (ml\/min or sccm), test pressure, and connection type when ordering. Custom leak rates and connection geometries are available.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Figurtech","offers":[{"title":"Default Title","offer_id":48632667111680,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3493\/1456\/files\/Standard-Leak-Holes-Placeholder-02.jpg?v=1776932492"},{"product_id":"customized-leak-test-fixtures-non-standard-tooling","title":"Customized Leak Test Fixtures (Non-standard Tooling)","description":"\u003cdiv class=\"fgt-product-desc\"\u003e\n\n  \u003cp class=\"fgt-lead\"\u003eA leak tester is only as effective as the fixture holding the part. Figurtech designs and manufactures custom leak test fixtures — from simple manual clamps to fully automated multi-station pneumatic nests — that deliver repeatable, production-grade test connections cycle after cycle.\u003c\/p\u003e\n\n  \u003ch2\u003eWhat We Design\u003c\/h2\u003e\n  \u003cp\u003eEvery fixture is engineered from your part geometry, test pressure, cycle time, and production volume. We work directly with your engineering team to define the sealing approach, tooling material, connector selection, and automation interface. Fixtures ship pre-validated against your tester and leak specification.\u003c\/p\u003e\n\n  \u003ch2\u003eFixture Types\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eManual clamp fixture\u003c\/td\u003e\n\u003ctd\u003eOperator-loaded, lever or toggle clamp actuation\u003c\/td\u003e\n\u003ctd\u003eLow-to-mid volume, multiple part variants, lab and incoming QC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePneumatic fixture\u003c\/td\u003e\n\u003ctd\u003eCylinder-actuated clamping, foot-pedal or PLC trigger\u003c\/td\u003e\n\u003ctd\u003eMid-to-high volume production lines, consistent clamping force\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMulti-station nest (2–4 cavities)\u003c\/td\u003e\n\u003ctd\u003eMultiple parts per cycle, matched to LM series multi-channel testers\u003c\/td\u003e\n\u003ctd\u003eHigh-throughput lines, switch buttons, lens modules, meters\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFully automated fixture\u003c\/td\u003e\n\u003ctd\u003eRobot-loaded, integrated with conveyor or rotary table, PLC-controlled\u003c\/td\u003e\n\u003ctd\u003eUnmanned lines, LE module integration, automotive assembly cells\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eDesign and Engineering Details\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible testers\u003c\/td\u003e\n\u003ctd\u003eAll Figurtech series: LY, LD, LF, LG, LM, LE\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeal life\u003c\/td\u003e\n\u003ctd\u003e≥ 500,000 cycles (standard sealing components)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSealing approach\u003c\/td\u003e\n\u003ctd\u003eFace seal, OD clamp, ID expand — selected per part geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy, stainless steel, engineered polymer — per environment and pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAutomation interface\u003c\/td\u003e\n\u003ctd\u003ePLC I\/O, pneumatic solenoid, robot flange mount available\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLead time\u003c\/td\u003e\n\u003ctd\u003eTypically 2–4 weeks from approved drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eTypical Applications\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eEV battery tray and liquid-cooling plate fixtures with multiple port connections\u003c\/li\u003e\n    \u003cli\u003e4-cavity switch button nests for LM series multi-channel testing\u003c\/li\u003e\n    \u003cli\u003eMedical catheter and soft tubing fixtures with zero-axial-force ID connectors\u003c\/li\u003e\n    \u003cli\u003eAutomotive sensor and housing fixtures integrated into assembly line conveyor stops\u003c\/li\u003e\n    \u003cli\u003eConsumer electronics IP67\/IP68 housing fixtures for inline waterproof testing\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eWhy Custom Rather Than Standard?\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePart-specific sealing:\u003c\/strong\u003e Every part has a unique port geometry — a custom fixture seals exactly where yours requires\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRepeatable clamping force:\u003c\/strong\u003e Pneumatic actuation eliminates operator variation in sealing pressure\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e500k-cycle durability:\u003c\/strong\u003e Production-grade sealing components validated for the volumes your line demands\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePre-validated delivery:\u003c\/strong\u003e Fixtures arrive confirmed against your tester and leak specification — no field debugging\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cem\u003eSend us your part drawing (or sample), test pressure, required leak limit, and target cycle time. We will propose a fixture concept, connector selection, and quote within 3 business days.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Figurtech","offers":[{"title":"Default Title","offer_id":48632667144448,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3493\/1456\/files\/Customized-Fixtures-Deep-Asset-01.jpg?v=1776932908"}],"url":"https:\/\/www.figurtech.com\/collections\/accessories.oembed","provider":"Figurtech Leak Test Solution","version":"1.0","type":"link"}